[Help] identify this molex type part #

iN33DCaTNiP

Well-known member
Joined
May 8, 2016
Messages
1,483
Reaction score
47
Location
San Diego, California
lVqVBSz.jpg


I found this in my scrap wire box that's full of jamma harness wires etc ( all of us have a box of these )

I test fitted this in my nt-2701 chassis and it fits perfectly for degauss ( spacing between pins,, center to center 10mm or 1cm )@ location p101. I removed the center pin kinda ghetto but it still fits snug...

now question really is it 0.093 or is it 0.063 cause I wanna get a new one...

my local frys sells connectors like this
 
Back
Top Bottom