Help ID this tube

mrbill2084

Well-known member
Joined
Oct 6, 2005
Messages
12,572
Reaction score
1,518
Location
san jose, California
I am getting ready to dispose of some monitors I had lying around and this is one I am not sure about. Anyone know what chassis will work with its yoke? Can the tube be used on a wells k7000?

the yoke has a sticker on it that says DYSA 9010 AO SANYO MEXICO.
here are some pics:

yoke-1.jpg


label.jpg
 
Its a 25" tube - prob not specific to an arcade monitor, at least not according to Google. You'd have to measure resistance across each winding on the yoke (vert = yello/green, horiz=blue/red) to see if its natively compatible with anything. If anyone someone could use a Weiya chassis to build a 25" out of it.
 
thanks for the info. its a clean looking tube that was shoved into a track & field cabinet.

I metered the yoke wires.
Y-G = 6.3 ohms
R-B = 1.6 ohms

I metered wires on a k7000 I had handy (weak green)
Y-G = 10.3 ohms
R-B = 1.7 ohms
 
Back
Top Bottom