Help fixing Frogger machine

Braido

Well-known member

Donor 2011
Joined
Jul 17, 2009
Messages
4,811
Reaction score
82
Location
California
Hello all,

I was working on my monitor a 4675 wells gardner for my Frogger machine. I got everything working great but when i turned the machine back on the monitor was flipped/inverted! No i am not sure what wires go where and i am a little worried that i will fry the monitor if i try swapping them without know the exact pacement.

Please help if you know what i did wrong here, thanks.

Braido...
 
You need to flip each half of the yoke plug, which is the plug that goes to the round copper thing on the back of the picture tube.

The plug has 4 pins, but its technically two plugs in one. There's usually a pair of red and blue wires, and a pair of green/yellow wires. Reversing the red and blue half will flip the picture up or down (if its upside down). Reversing the green/yellow half will invert or un-invert the pic (if its backwards/mirrored).

Hope that helps!

Here's a more involved description but hopefully you get the idea...

http://www.wolfelectronics.ca/yoke.html
 
Pretty sure i understand, thanks for the info. very fast! I really appreciate the help and i'll let you know how i make out.
 
Back
Top Bottom