Help a noob!

UndeadRussell

New member
Joined
May 1, 2011
Messages
32
Reaction score
1
Location
San Antonio, Texas
Hello! I am going to be doing my first cap kit soon and would like some suggestions on which soldering kit to purchase and which solder is best to use.

Thanks for the help!
 
Places to look

bob roberts has some nice stuff at his web site with good prices, or your local RADIO SHACK has what u need. dont forget to get a good set of diagnol cutters and a solder sucker plus your flux!
http://www.therealbobroberts.net/

Oh ya bob has the best deals on the cap kits too u can do a 1 stop shop there!!
 
Hello! I am going to be doing my first cap kit soon and would like some suggestions on which soldering kit to purchase and which solder is best to use.

Thanks for the help!

http://therealbobroberts.net/parts.html#tools
http://www.therealbobroberts.net/sskit.html

Many of you newbies have been asking for a cheap soldering kit saying that you only intend to do a monitor cap kit job or some other minor soldering job and it may never be used again! Some of you just don't know if you are adept at soldering & don't want to lay out the big bucks to find out, so you are looking for something cheap enough to take a stab at it & find out. Well.. I scouted around and found these things to make up an inexpensive & disposable soldering kit & if it helps out I'll see if I can't keep them in stock.

sskit.jpg


http://www.alsarcade.com/capkitp.htm

CAP KIT INSTALLATION 101

By Al Warner & Rodger Boots
Additional information was provided by: Paul Frazee, Tony Berry, Steve Zeuner, and Bob Roberts
 
Is there a better quality soldering iron that you'd recommend?


http://therealbobroberts.net/parts.html#tools
http://www.therealbobroberts.net/sskit.html

Many of you newbies have been asking for a cheap soldering kit saying that you only intend to do a monitor cap kit job or some other minor soldering job and it may never be used again! Some of you just don't know if you are adept at soldering & don't want to lay out the big bucks to find out, so you are looking for something cheap enough to take a stab at it & find out. Well.. I scouted around and found these things to make up an inexpensive & disposable soldering kit & if it helps out I'll see if I can't keep them in stock.

sskit.jpg


http://www.alsarcade.com/capkitp.htm

CAP KIT INSTALLATION 101

By Al Warner & Rodger Boots
Additional information was provided by: Paul Frazee, Tony Berry, Steve Zeuner, and Bob Roberts
 
Back
Top Bottom