Hello from Eastern Washington

Palouse_Arcade

Member

Donor 2018-2019
Joined
Jan 13, 2018
Messages
30
Reaction score
7
Location
Colfax, Washington
Hello,
I am located on the rolling hills of the Palouse here in Eastern Washington. Grew up in North Idaho in the 80's so arcade machines are in my blood. I started to collect and restore the machines in 2000, but got out of it when I moved in 2005. I always kept my first machine: Tron.

I started to get machines again a couple years ago. Over the summer I picked up a Crime Fighters machine that was in a Gauntlet cabinet. After looking around online I found this forum and lurked around reading for months. After reading Ckasek's Gauntlet Restoration / De-Conversion post: https://forums.arcade-museum.com/showthread.php?t=224284 , I became motivated to bring back that Gauntlet.

Also lurking around this forum, I found a source for a replacement harness from Level99, which saved me time from going through the Digi-key catalog trying to find old 11-pin Molex connectors!

I am taking pictures of the restoration and I will post them soon.

Thanks for reading!
 
welcome to the forum. BTW: i stock all the arcade/pinball connectors so it easier than digikey.
 
welcome to the forum. BTW: i stock all the arcade/pinball connectors so it easier than digikey.
Thanks for the link to your site... I see you have the elusive 11-pin Molex connector with the 0.10 offset, that is the one I was looking for. That's great that you are in Montana, fast shipping I hope!
 
Thanks for the link to your site... I see you have the elusive 11-pin Molex connector with the 0.10 offset, that is the one I was looking for. That's great that you are in Montana, fast shipping I hope!

most of washington is 1 day.
 
Back
Top Bottom