smoke1 New member Joined Feb 7, 2010 Messages 41 Reaction score 0 Location North Carolina Feb 20, 2010 #1 I have sound on my DK machine but the picture stopped working, what should I try first?
80scoinops Well-known member Joined Sep 29, 2009 Messages 2,933 Reaction score 2,065 Location California Feb 20, 2010 #2 Start with the easiest things first. Look for loose connections and check fuses for continuity.
skinnyt007 New member VAPS Joined Oct 9, 2009 Messages 197 Reaction score 1 Location statesville, North Carolina Feb 20, 2010 #3 Then check to see if the flyback is good.
modessitt Volunteer: Encyclopedia Submission Moderator VAPS Joined Mar 22, 2007 Messages 33,414 Reaction score 325 Location Austin, Texas Feb 20, 2010 #4 Turn the brightness up. Since sound on a DK is dependent on the monitor B+ voltage being present, it's rare that the sound works and the picture doesn't. Do you have neckglow?
Turn the brightness up. Since sound on a DK is dependent on the monitor B+ voltage being present, it's rare that the sound works and the picture doesn't. Do you have neckglow?
OP OP smoke1 New member Joined Feb 7, 2010 Messages 41 Reaction score 0 Location North Carolina Feb 21, 2010 #5 I took the sellers word for what was said about having sound but no picture, but now I checked it out for myself and there is no sound or picture.
I took the sellers word for what was said about having sound but no picture, but now I checked it out for myself and there is no sound or picture.
Dokert Well-known member VAPS Joined Jun 3, 2007 Messages 12,751 Reaction score 141 Location Arlington, Washington Feb 21, 2010 #6 check the two fuses on the monitor
OP OP smoke1 New member Joined Feb 7, 2010 Messages 41 Reaction score 0 Location North Carolina Feb 21, 2010 #7 Looks like a tkg4 board in a tkg3 cab, is there a difference in the wiring that I should be looking at?
Looks like a tkg4 board in a tkg3 cab, is there a difference in the wiring that I should be looking at?