Hauling a wide body pin and a Stargate in a short bed truck???

redlines

Member
Joined
Aug 5, 2009
Messages
74
Reaction score
3
Location
Novato, California
Hauling a wide body pin and a Stargate in a short bed truck???

I am getting a widebody pin and a Stargate tomorrow. I have a 2000 tundra short bed and was wondering if I can fit them both or will I have to stack the pin on top of the stargate? Looks like I would have to put the stargate on its side and them put the pin on top of that, strap it down and hope for the best. Any suggestions?
Thanks
 
I'd probably try putting the Stargate in first right up to the cab and the pin either beside it longways or against it and right out onto the tailgate. My truck only has a 5.5' bed plus a bed extender. It will hold 3 games or 3 dirt bikes, so it seems like you'll have room to spare. :)

3side.jpg
 
I would take the legs off. Slide the pin with its head up to the back of the cab and lay the stargate down on its back and slide it in up to the head. You should have plenty of room. the body of a wide body pin is not as wide as a video game. 2 19" videos will almost fit side by side in a full size short bed truck.
 
Back
Top Bottom