Has anyone used 909 Surfaces laminate before?

Seems too cheap to even bother with.
For the cost of the side art thats going over it stick with what is known to be good.
 
I do prefer the .039 thickness. over the .024

$29 versus $16 per sheet but still much less expensive than Wilsonart at the moment.
 
I'm going to go with a 5x12 sheet of Formica at $108 plus $25 shipping rather than 4 sheets of 909 Surfaces at $17 plus $37 shipping. It's $30 more for the name brand laminate vs. the generic brand. Plus, the company I'm going to order this from, Feeney Supply, has Wilsonart 600 adhesive.

Thanks everyone!
 
The 909 laminate from woodworkerexpress has free shipping this month, which is quite substantial.

Is there any preference for laminate thickness (see below)? I do have concern that the thicker stuff would stick out passed the T-molding.

I was going to grab adhesive here as well - is there anything else worth picking up?

1738525975366.png
 
@stkataran, the 909 is very brittle during use. I personally wouldn't buy anything thinner than the .039 stuff and if prices ever come down I'll be looking at thicker products. That said, it works well enough, look at @Phetishboy s Cheyenne thread to see it in action.

There will be no issue with sticking out past T-molding, the .039 is plenty thin.
 
@stkataran, the 909 is very brittle during use. I personally wouldn't buy anything thinner than the .039 stuff and if prices ever come down I'll be looking at thicker products. That said, it works well enough, look at @Phetishboy s Cheyenne thread to see it in action.

There will be no issue with sticking out past T-molding, the .039 is plenty thin.
Awesome. Exactly the stuff i want to hear. .039 it is.
 
I have used it a couple of time. I can see no difference from this and other brands. I just bought 5 sheets and used it on a Gun Force cabinet. no issues
 
Back
Top Bottom