Harness identification help

Bebopboom

Well-known member

Donor 2024-2025
Joined
Feb 28, 2024
Messages
630
Reaction score
626
Location
Orlando, Florida
So I have been digging thru a big tub of harness and figures there might be some people who could identify a harness from looking at it. A lot of them seem to be Atari harness.
 

Attachments

  • IMG_20250403_125558429.jpg
    IMG_20250403_125558429.jpg
    486.8 KB · Views: 24
  • IMG_20250403_125729993.jpg
    IMG_20250403_125729993.jpg
    558 KB · Views: 24
  • IMG_20250403_125934901.jpg
    IMG_20250403_125934901.jpg
    693.3 KB · Views: 23
  • IMG_20250403_130229745.jpg
    IMG_20250403_130229745.jpg
    540 KB · Views: 18
  • IMG_20250404_104839948.jpg
    IMG_20250404_104839948.jpg
    428.9 KB · Views: 18
  • IMG_20250404_104951973.jpg
    IMG_20250404_104951973.jpg
    484.6 KB · Views: 18
  • IMG_20250404_105124239.jpg
    IMG_20250404_105124239.jpg
    762.3 KB · Views: 22
A looks like Centipede
B is likely Tempest
C's raster, but doesn't jump out as anything obvious
D looks like Battlezone/Red Beron
F looks like Pacman/Galaxian
G kinda looks like Kangaroo
 
A looks like Centipede
B is likely Tempest
C's raster, but doesn't jump out as anything obvious
D looks like Battlezone/Red Beron
F looks like Pacman/Galaxian
G kinda looks like Kangaroo

I checked schematics after your tips
A- centipede
B- not tempest
D battle zone
F pac
G not kangaroo
 
Since @andrewb is too lazy to actually be helpful:

B is prob Pole Position.
The twisted pairs are audio, not vector outputs, and the 15-pin amp is the service panel, not a color vector connector.
 
Back
Top Bottom