Hard Drivin Help.... Please !!!!

oschonor

New member
Joined
Apr 30, 2010
Messages
49
Reaction score
1
Location
Ohio
I am trying to go through the set up and configuration part where you need to use the coin slot buttons to toggle through lists. The problem is the coin buttons will not toggle up or down the list when pressed. The lights are on but not working for setup. how can i fix this or work around it? Thank you.

Also I have another Hard drivin which is for sale whole or parts.
 
I am trying to go through the set up and configuration part where you need to use the coin slot buttons to toggle through lists. The problem is the coin buttons will not toggle up or down the list when pressed. The lights are on but not working for setup. how can i fix this or work around it? Thank you.

Also I have another Hard drivin which is for sale whole or parts.

You must have a loose wire or bad connection with your coin mechs. You need to fix this, there is no other way to move through the menu
 
I thought the same thing but everything is connected. what if the caoin switches are bad will that effect it? If so, what should the resistance between switch terminals be? Thanks.
 
I thought the same thing but everything is connected. what if the caoin switches are bad will that effect it? If so, what should the resistance between switch terminals be? Thanks.

Well, have they ever worked before? Somewhere something isnt right.

just because the lights are getting power doesnt mean the coin wires are correct. Something is not connected somewhere, or maybe the PCB is shot.
 
i just bought this one, self test checks out all ok. I just want to do set up and advance settings to make sure shifter magnet is good cause it shifts without clutch and there is little to no resistance in shifter. coin mech just holdin me up. is there maybe a way to jumper the switches to see if they are bad or maybe check resistance?
 
i just bought this one, self test checks out all ok. I just want to do set up and advance settings to make sure shifter magnet is good cause it shifts without clutch and there is little to no resistance in shifter. coin mech just holdin me up. is there maybe a way to jumper the switches to see if they are bad or maybe check resistance?

I have a Race Drivin, but im pretty sure there is no difference. As to your shifter, it SHOULD shift without the clutch being pressed, thats normal. There shouldnt be must resistance either on the shifter. Sound like that is all well.

How much did you get yours for? glad too see more hard drivins out there :D

As the the coin triggers and sure im not sure what to tell you, maybe the triggers are bad? Hopfully someone else can help with this one.
 
this is my second one, i got it for $77 on Ebay, what a deal, has marquee and verything, great shape, i'll post pic in a bit.
 
you know which chips and locations of them that store settings and lap times?
 
Back
Top Bottom