Hanterex MTC 9000: caps 17-20 not in cap kit?

MajorHavoc

Well-known member

Donor 2011
Joined
Jun 6, 2007
Messages
1,661
Reaction score
108
Location
Saint Leonard, Maryland
Hantarex MTC 9000: caps 17-20 not in cap kit?

I just finished installing a Bob Roberts cap kit in a Hantarex MTC 9000 (20") and noticed that caps 17-20 (10u/25v) and 53 (470u/200v) on the board are electrolytic but replacements are not included in the kit. I think I'll replace them anyway.

Any contrary thoughts? Any idea why these are not in Bob's cap kit?

Thanks!
 
Last edited:
Oversight? Are they on the list?

Are you sure it's a MTC 9000 and not a MTC 9110?

Not all cap kits are complete unfortunately. I've seen 20EX cap kits that don't include the caps for the power section, because someone got the idea that they weren't as prone to failure as other sections.

And some 4900's have a 22uF 25v cap on the chassis, and some don't. Either way, the cap kit won't include it.

And don't forget that 1uF 50v cap that's bridges over the top of the diode. It's NEVER in the cap kit, either....
 
Oversight? Are they on the list?

No, they are not on the list.
Are you sure it's a MTC 9000 and not a MTC 9110?

No, but it has a BIG label that says MTC 9000. Unfortunately there are fields for info that either were not filled out or have faded completely.

And some 4900's have a 22uF 25v cap on the chassis, and some don't. Either way, the cap kit won't include it.

And don't forget that 1uF 50v cap that's bridges over the top of the diode. It's NEVER in the cap kit, either....

Is this last paragraph still referring to the WG 4900?

Thanks for the info!
 
Is this last paragraph still referring to the WG 4900?

Thanks for the info!

i think so, although I may be confusing it with the G07, but I don't think so...
 
Back
Top Bottom