hantarex polo yoke specs

mudhens1

Active member
Joined
Oct 30, 2006
Messages
1,455
Reaction score
15
Location
chillicothe, Ohio
i've researched on here and can't find exact measurements for a 19" hantarex polo yoke...i have the yoke from a 19" mtc 9000 and a chassis from a 19" polo...not sure if the ohms are compatible...i don't have a polo yoke to ohm out, but the 9000 yoke measures 14 and 2.5
 
can anyone help out? i'm anxious to hook up the monitor and don't want to fry anything, then get on here and have you guys try to tell me how to fix what i screwed up :)

i have a 19" polo chassis and a 19" mtc9000 yoke...just need to know if they'll work together
 
haha.. Hey man, for what it's worth. (probably nothing) I worked on a polo 25" pretty heavily lately. For giggles I measured the resistances on the yoke as I was curious if a WG 25k 7000 chassis would match and sure it enough it would match up. It fell with in the k7000 ranges that I've had experience working with. As for the 19" versions IDK. I guess I'm just saying, that since the 25's matched.. Maybe the 19's do too.. Let us know if you decide to experiment.
 
haha.. Hey man, for what it's worth. (probably nothing) I worked on a polo 25" pretty heavily lately. For giggles I measured the resistances on the yoke as I was curious if a WG 25k 7000 chassis would match and sure it enough it would match up. It fell with in the k7000 ranges that I've had experience working with. As for the 19" versions IDK. I guess I'm just saying, that since the 25's matched.. Maybe the 19's do too.. Let us know if you decide to experiment.

This is true. I have a 25" WG k7000 chassis currently operating a Polo tube. The specs on the 25"s are close enough, though I had to change the width cap to get the picture wide enough to totally fill the screen, though it was close. Not sure on the 19"s either, sorry.
 
Back
Top Bottom