Hantarex/Polo Verticle Collapse

zenomorp

Well-known member

Donor 2015
Joined
Apr 5, 2008
Messages
9,062
Reaction score
3,935
Location
Wichita, Kansas
Hey guys. I just bought an empty cabinet except for the monitor. It's the original Hantarex/Polo 25". It turns on but goes right into full vertical collapse. I'd like the get it fixed as a backup to another monitor I have.

I perused the threads about this issue and couldn't find any specifically about this problem. There is just a white line across the screen. You can see colors and stuff change, but that's about it. Any suggestions would be greatly appreciated. Thanks!
 
I'm working on a Hantarex Polo 33" right now with the exact same problem. I read that it could be the vertical IC, or a cap, and so on so, I decided to do a cap kit, replace the vertical IC, and a few other components. I have all the part numbers and schematics if you need anything let me know.
 
I'm working on a Hantarex Polo 33" right now with the exact same problem. I read that it could be the vertical IC, or a cap, and so on so, I decided to do a cap kit, replace the vertical IC, and a few other components. I have all the part numbers and schematics if you need anything let me know.

Will do. Thanks.
 
Back
Top Bottom