Hantarex Polo problems.

timply

Member
Joined
Jun 13, 2017
Messages
33
Reaction score
2
Location
BATESVILLE, Mississippi
I bought a MK2 cabinet and the Polo didn't turn on, I followed the flowchart and ordered a cap kit, a HOT and a flyback. I spent the day installing everything, hooked it up. Now its turning on but this is all that its showing. I couldn't find anything on the flowchart about this problem. I took everything back apart and gave it a once over but I really don't know where to begin. Where did I go wrong?

Its actually a solid color, my phone is making it look weird
 

Attachments

  • 20180516_200036.jpg
    20180516_200036.jpg
    534.7 KB · Views: 22
I bought a MK2 cabinet and the Polo didn't turn on, I followed the flowchart and ordered a cap kit, a HOT and a flyback. I spent the day installing everything, hooked it up. Now its turning on but this is all that its showing. I couldn't find anything on the flowchart about this problem. I took everything back apart and gave it a once over but I really don't know where to begin. Where did I go wrong?

Its actually a solid color, my phone is making it look weird

Following. I had a similar issue with one I never figured out
 
Then you should have 200V on the heat sinks of T2, T4 and T6. Is it so? You should also have 12V on the bases of said transistors. If you don't, then R12 may be open. If everything is OK here, the LM1203 may be faulty.
 
Lol the soldering part was easy as I've done console mods and stuff, but all this measuring voltages and troubleshooting is new to me and also the fact the thing can knock me into tomorrow lol
 
Last edited:
Back
Top Bottom