Hantarex Polo not working / faulty

?

Do you have static charge on the face
of the tube after you plug it in?
If you completely discharge it then its easier to tell
when it gets charged!
Have you marked the master screen pot on fly and then turn it clockwise
to see if you have any brightness.do you see heater glow.

You check for voltages on the neck board for any voltages?
I would clean off around the yoke i see something laying
around it,remove power and clean the area after discharging the tube
and around the anode of the tube.
All game boards should have sound,put it in game play confirm
its working good.
Don't forget to do a search on the chassis so you can get an idea
what goes wrong with others.
Has this chassis had a cap kit install yet?
 
Back
Top Bottom