Hantarex Polo blooming issue

LyonsArcade

Well-known member
Joined
Feb 9, 2006
Messages
19,367
Reaction score
3,854
Location
Rock Hill, South Carolina
Hi guys!
I have a Hantarex polo in a Street Fighter II 25" game that I bought with a dead monitor. It was ticking... so I ordered up a flyback and a capkit from good ol' bob roberts, and installed them just now. The monitor came up and frankly looks amazing, but it blooms depending on how bright the image is on the screen. With a light image, the picture swells about an inch, and stays like that until the scene changes.

I could leave it like it is, but it's kind of annoying. Anybody have a fix for it?
 
If you got all the radial caps in right, then you
need to replace C172 3n3 1500kv,c174 8n2 1500v,
c175 12n 630v,C170 390n 250v, solder real good D134,D135..
Unless the P.F caps look good and test good,but i dought it..

The Polypropylene Film Capacitors will look real dark on there belly
or crack,swollen, they need to be replaced along with the caps kit
and replace vertical ic Ic103 a TDA1675,and solder all over PCB
any bad connections and standup boards, replace flyback.This will restore your chassis
Good Luck!
 
Back
Top Bottom