Hantarex MTC-900

ArcadEd

Member
Joined
May 25, 2006
Messages
579
Reaction score
2
Location
Tucson, Arizona
Does anyone know if this requires the remote board? My monitor is extremely bright and the contrast is over adjusted. It has these pots on the main chassis but neither of them do anything. I see a cable coming from the chassis but there is no remote board attached.

Thanks

Ed
 
Pretty sure EVERY monitor that uses a remote board needs to have it hooked up. Otherwise, whatever pots are on the board, the chassis will see them as have ZERO resistance due to them not being hooked up, this resulting in your problems.
 
Actually, nevermind. There is no remote board. I was looking at a CPS1 kick harness and just assumed, when I followed the wires back I realized this as it wasn't connected anymore :).

Ooops!

So maybe the cap kit I have will fix the bright/contrast issues. Thanks
 
Back
Top Bottom