Joshuart311 Member Joined Dec 6, 2010 Messages 212 Reaction score 2 Location Shreveport, Louisiana Mar 11, 2011 #1 I have a hantarex 9000 that was dead. I put a cap kit on it and now I get a colorful line across the center like vertical collapse. Should I replace the ic?
I have a hantarex 9000 that was dead. I put a cap kit on it and now I get a colorful line across the center like vertical collapse. Should I replace the ic?
richiewoo New member Joined May 21, 2010 Messages 253 Reaction score 5 Location Douglassville, Pennsylvania Mar 12, 2011 #2 Not sure, but... Here's some good troubleshooting for that monitor... helped me out! http://www.coin.demon.co.uk/monitor.htm They say that it could be an IC. Gives you other stuff to ckeck too.
Not sure, but... Here's some good troubleshooting for that monitor... helped me out! http://www.coin.demon.co.uk/monitor.htm They say that it could be an IC. Gives you other stuff to ckeck too.
ArcadeMonitor Member Joined Feb 8, 2011 Messages 312 Reaction score 2 Location Bakersfield, California Mar 13, 2011 #3 Check the voltage at pin 14 on the IC 1 it should be 20VDC and report back! I want to know if its Low or OK. Last edited: Mar 13, 2011
Check the voltage at pin 14 on the IC 1 it should be 20VDC and report back! I want to know if its Low or OK.