Hantarex 25 in Monitor issue

kidemtjoe

New member
Joined
Jun 6, 2011
Messages
60
Reaction score
0
Location
Iron City, Georgia
I have a Hantarex 25 in monitor that I took out of a Big Buck Hunter cabinet,it was working before I took it out.And I went to put it in my Konami 4 player cab and now it dont work.It powers on comes to a blue screen and then nothing else.I can adjust all the colors thru, but I do not get a game picture.The game that is in it works because I tested it in another cabinet. Also before when I first hooked this monitor into the new cabinet,there was a loud ticking,hissing like noise.When I heard this I turned the monitor off and readjusted the suction cup and it quit. There is neck glow and none of the caps look bad. So i was wondering if anyone had any good ideas for me? Im really at a loss here. I do know that there monitors are known to go out on a whim and that the HOT and flyback are its own worse enemy. But if anyone knows anything that can help,please let me know.Thanks Joe
 
If you have a pic on screen, even if its just colors, the monitor is probably fine. My guess is your pcb isnt booting correctly. Start by testing your voltages to the pcb.
 
Ok thanks, Ill start looking when I get home and let you know.Someone sent me a message and asked if I had a iso transformer hooked to it and I did.They told me to unhook it and it should work.So im hoping when I get home.
 
Back
Top Bottom