Hang on, no buttons working.

Michaelthurston

New member
Joined
Sep 30, 2012
Messages
338
Reaction score
2
Location
San antonio, Texas
Hey guys I have a hang on cab I recently brought back to life, and the only problem I'm having now is that literally no buttons are working on the cab. No coin switches, no controls, not even the test button panels. All the connectors look fine and wiring looks good. Any ideas? Of what I should check?
 
Hey guys I have a hang on cab I recently brought back to life, and the only problem I'm having now is that literally no buttons are working on the cab. No coin switches, no controls, not even the test button panels. All the connectors look fine and wiring looks good. Any ideas? Of what I should check?

ground wires, check all the wires but look for a ground wire that came loose or is broken inside the insulation
 
Found the problem. I had missed a connector somehow. Works fine now! I just have a problem with the monitor now, and hang on will be at 100%!

Post that in the monitor section, many there will help you. Buffett has helped me out quite a bit and he can and will answer most questions about the monitors.
 
Back
Top Bottom