FS Parts: GUN FIGHT midway 1975 bronze age parts for sale

[r5g_on_klov]

shipped prices for usa
out of usa ask for quote, thanx

250 pcb set, does not boot up, burned traces on sound pcb, has a rare 8080
250 cp complete, needs some work and tlc
sold monitor
130 coin door
130 wire harness
40 non work power supply
30 arcadeshop power supply adapter (need your own happ power supply to plug into)
130 front glass
lmk other items needed
ect
had whole thing avail f/s over 7 months here and c list, no serious buyer

 

[cwilkson]

What was wrong with the cabinet?

 

[r5g_on_klov]

bottom fell out /bottom sides rotted, due to major dry rot

 

[r5g_on_klov]

pix of cp

 

[Azure Oz2]

GLWTS.

Bump for a question

Can you confirm the Main PCB Rev, it's blurred in the pic. Could be a great help for the thread on jumpers for different revs if it is one we have not seen a pic of. Looks like a 900D/E/F which we know about, hoping it is a 900G.

 

[r5g_on_klov]

more pix of pcb lmk if you can see it here

 

[cwilkson]

900D confirmed.

 

[Azure Oz2]

more pix of pcb lmk if you can see it here

Thanks for those pics. It is an 80-900D. We have that one covered.

FYI or the buyer, it is using AMD ROMs and they are strapped for triple supply +5v on pin 24 with +12v on S3 and -5v on S2). S5 strapped to Gnd and S1 strapped to A9. They should be 1KB (8Kbit) in size, which also matches the S6 address decode jumpers. From the info I have been gathering the only multi supply AMD pinout I have so far (a 9208) does not use the -5v connection. This strapping also matches the pinout for an Intel 2708.

 

[r5g_on_klov]

pcb set now 225 shipped usa