Great service - Arcrevival Amp board rebuild

[jonathan1138]

I have a SW cockpit with 19 inch amp (looking for a 25 though). The Amp boards were always suspect - rough solder joints, original caps and transistors, etc. I never really trusted them. About a month back the image started to get more shaky.

I was considering tracking down a solution myself, but decided its best to have the boards returned to near original glory so i could trust them again - I Contacted Dave (ArcRevival), whose service i had watched here - very impressed with what i saw.

His turnaround was very good and communication was thorough throughout - frequent updates to progress. When i got the boards back i couldnt believe the quality - all of the suspect joints, wiring, etc were completely rebuilt ( i knew this was what was being done, but seeing it in person is much better!). I feel very confident with these boards. I didnt want to install them they looked so nice and clean.

Finally, got them running - picture on my Amp is now incredibly clear, crisp, and stable (as stable as an amp can get). I am very happy with the results and expect many years of worry free use. This is a valuable service and anyone considering it should consider the great work provided.

 

[Jedidentist]

x2
Dave's the man. I spoke with him on the phone for 20 min last night troubleshooting my Amp...only to find out I needed to adjust the brightness!

 

[JC Arcade]

I wanted to add a long overdue shout out to Dave as well regarding his Amp board rebuild service. I would echo everything Jonathan said. Great communication, and when I got the boards back, I couldn't believe they were the same ones. I have had these installed in my Star Wars since May, and they have been rock solid with a great picture. Thanks again, and I obviously would highly recommend this service.

 

[Braido]

Does he work on the WG6100 as well?

 

[tron guy]

yeah I a a huge arc fan. hooked me up and helped me out more than I can count.
hope to return to the favor at some point.

 

[ArcRevival]

It's Thanksgiving so what better time to say thanks to you guys for allowing me to work on your boards. I have said it before and I will say it again, I always feel honored when people trust me with their arcade games. Especially the Ampliphones.

I have done a lot of K6100's but since I have moved down to the San Francisco Bay Area, I do not have all my games here and cannot test 6100's, G05-801's, or 19v2000's. I am going to try and make a trip back to Boise to get the rest of the games in December if weather permits and then should be good to go.