Grayhound Skill Crane Machine wont grab. (SOLVED)

Bennyv07

Member
Joined
Apr 17, 2019
Messages
62
Reaction score
12
Location
Colorado
I have a Grayhound Skill claw machine that just doesnt close/grab anymore. Ive tried to adjust the pot on the pcb board but nothing has changed. Any help would be greatly appreciated. Thanks.

IMG_9567.jpegIMG_9566.jpeg
 

Attachments

  • IMG_9565.jpeg
    IMG_9565.jpeg
    384 KB · Views: 6
  • IMG_9563.jpeg
    IMG_9563.jpeg
    329 KB · Views: 7
Last edited:
Fixed it by reflowing all of the solder points on the claw pcb board. Not sure if thats what its called, but its the board where the claw tension pot is located.
 
Back
Top Bottom