Grayhound Electronics Casino Royal

IowaUSMC

New member
Joined
Jan 21, 2011
Messages
4
Reaction score
0
Location
Iowa
I was given this arcade game. It is a casino game with 5 different games. When turned on, it will run through a post test and everything is okay. But when it passes out of the post test, all I get is a red screen. There is a switch you can flip and it tells you all the dip switches and allows you to program the board. Also in that screen is a button test screen. All of this works, but when the game actually tries to boot, all I get is the red screen.

Any thoughts? Any help would be appriciated.
 
Hey..

I've got a greyhound casino pcb that I pulled years ago from a working game.. Can't test it now, but I'll sell it to ya cheap :)
 
Thanks for the reply.

I could not find a battery on the ROM board. When the game starts, it checks all the game ROMs and claims they are all okay. Then when it goes to bring up the game, all I get is this red screen.
 
I found the battery on the ROM Board and have placed an order for a new one. I will update thread after I receive and replace it.

thanks again for the help.
 
Well, I got the battery and it didn't help at all. Any other ideas?? The mother board and daughter board both have Grayhound Electronics 1996.
 
Last edited:
Back
Top Bottom