Graphics issue on Lifeforce board

souzilla

New member
Joined
Nov 20, 2009
Messages
1,090
Reaction score
5
Location
New Hampshire
I have a board that works fine, the only issue is the initial title screen is messed up (sorry for the crappy photo). I don't have a lot of experince with these boards so if someone could point me in the right direction of the area of the board to look at that would be great
 

Attachments

  • IMG_2933.jpg
    IMG_2933.jpg
    101.5 KB · Views: 16
What is that, a TV you are running that on? I can't tell.

Have you checked to make sure you have proper +5 to start with? I'm not much good on PCB repair but check the basics first. Here's a link to the manual in case you don't have it. It has a self-check but it doesn't look very comprehensive unfortunately.

http://antelopearcade.com/manuals/LifeForce Manual.pdf
 
Back
Top Bottom