Gottlieb Buccaneer Help?

TiffanyArcade

New member
Joined
May 9, 2010
Messages
24
Reaction score
0
Location
Las Vegas, Nevada
I have a Buccaneer I need some help with. I turn it on and this is stuck on (PIc attatched) and the game will not play. I tinkered with the contacts and relays underneath all seemed fine. Cant figure out why TILT is stuck on. And I put a quarter in the coin mech and it just spins the wheel motot. HELP!!!!??
 

Attachments

  • photo 4.jpg
    photo 4.jpg
    51.8 KB · Views: 15
  • photo 3.jpg
    photo 3.jpg
    47.7 KB · Views: 13
Not sure which 1 is. Will have to check on those all. Still learning how to work on these machines! :). Didnt realize how much work goes into these. WOW
 
well, first thing you should do before you start tinkering with things too much is go to www.marvin3m.com and read the mechanical / em pinball repair guides, hopefully you have the schematics for your game & can understand them and go from there.

there is loads of trouble shooting info on the marvin site.

great game BTW

good luck kenny
 
Hey

Here is sum pics of my machine! What is my problem??
 

Attachments

  • photo 1-1.JPG
    photo 1-1.JPG
    65.1 KB · Views: 14
  • photo 2-1.jpg
    photo 2-1.jpg
    50.3 KB · Views: 16
  • photo 3-1.JPG
    photo 3-1.JPG
    73.1 KB · Views: 12
  • photo 1-2.jpg
    photo 1-2.jpg
    46.6 KB · Views: 14
  • photo 2-2.jpg
    photo 2-2.jpg
    49.7 KB · Views: 14
Those wires behind the tilt switch in the lower cabinet, are they holding it closed? In the photo, it's between the fuses and the big disk..... the switch sitting over the hole, with the weight on it.

Other than that, no clue...

-Hans
 
Back
Top Bottom