Got to See an old Friend - PAC Man cabaret

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,939
Reaction score
9,400
Location
Avon, Minnesota
So I did this cabinet restoration probably eight years ago now. Sold it to a friend of mine's wife about 7 years ago. Well last week she texted me and let me know that it needed some attention as two of the directions, right and down were not working. Finally had some time to stop by, and it was just some dirty contacts. The entire machine seemed to be covered with a light layer of nicotine/exhaust fumes/all sorts of particulates from a mechanic shop where it's currently residing. Once I got it up and running, decided to snap some pics before I left. It was nice to see him again.

IMG_2523.jpeg
IMG_2522.jpeg
IMG_2524.jpeg
 
Last edited:
The blue sticker is there so that folks know there are blue stickers available.

I have a feeling that was either a punch out for, or originally had a start button there. Like these -
 

Attachments

  • midway2.jpeg
    midway2.jpeg
    104.7 KB · Views: 6
  • midway1.jpeg
    midway1.jpeg
    435.6 KB · Views: 6
I have a feeling that was either a punch out for, or originally had a start button there. Like these -
That is correct. I had a couple of midway coin doors powder coated blue. One of them was for a 280 Zzzap that required the start button. So I pulled the blank plug out and popped it into this black powder coated door that didn't need the button.
 
Back
Top Bottom