Gorgar perimeter lights stopped!

scamp

Member
Joined
Jun 20, 2010
Messages
194
Reaction score
0
Location
New Jersey
I just noticed this morning that my Gorgar playfield perimeter lights (along sides under plastics) and most of the headboard lights (except for the player numbers)..mainly the ones that light the backglass all stopped working this morning!!!

Could this be a fuse? It would seem like it's all related...They were all working fine for a while...

Any help would be appreciated!!

Thanks!!

-S
 
Are the gi fuses in the backbox or in the body?

Does the manual outline the sizes of the fuses?

Thx!
 
My first posts here were about GI issues on my bride of pinbot. I ended up making some dumb mistakes.

I looked at ipdb and they only have an instruction booklet that is 12 pages long. Not much help.

The fuses seem to be in the backbox according to a picture on ipdb. The bottom right board is the power supply board. And there are some fuses below that. Make sure to pull the fuse to check them. That was my problem.

try to follow a few GI wires back to the board and see where they plug in. Check that connector for signs of being burnt.

My machine had the wrong fuses in many places and it was a pain, but it is working great now. Looked around and can't find much info on what fuses to use. Will keep looking though.
 
Got it...20amp Fast Blow and 2- 4amp Fast Blows...

Once replaced all is working...

I hadn't replaced these, so I guess they were due...

Thanks to all!!
 
Back
Top Bottom