Gorf problem - With video description

ebo0763

Active member

Donor 2012, 2016
Joined
Dec 23, 2011
Messages
725
Reaction score
20
Location
NB, Canada
I have this weird issue wwith the cab. The game pcb should be fine since i tested it in my upright Gorf cab. It se3ms there may be a short somewhere?

Please let me know if you have any idea.

 
There is a connector on the IO board, the longest one. Remove that and make sure none of the pins on the board have folded over. Before removing the connector look and see if it was installed wrong. It is keyed but its possible the key is missing which would allow it to be installed incorrectly.
 
There is a connector on the IO board, the longest one. Remove that and make sure none of the pins on the board have folded over. Before removing the connector look and see if it was installed wrong. It is keyed but its possible the key is missing which would allow it to be installed incorrectly.

Ok. Thanks again. I'll try tomorrow!
 
Back
Top Bottom