Gorf Mini (Cabaret) Help Needed - Picture

gsrogers

Well-known member

Donor 2023-2024
Joined
Apr 25, 2007
Messages
6,398
Reaction score
1,108
Location
Friendswood, Texas
A couple of weeks ago I asked the group for help with a Gorf Mini I am restoring. Very nice to see many folks jump and go out of their way to help me. Unfortunately the upright and cabaret wiring is different so I need to ask for help again.

What I need are close up pictures of the large wiring connector that goes to the power supply board. Mine has been cut so figuring out how to power it up is giving me a fit. Can some Gorf Cabaret owner please help me out and email some pics to ([email protected])...email is part of my address.

Many thanks,
Garry
 
Mini does not have the display board so that connector is missing otherwise the harnesses are pretty close. The manual has the wiring schematics with wiring colors for both I believe too. I may have a xtra mini wiring harness laying around.

Dave
 
Page 4 and 5 of the schematics have the power connectors for the Mini here:
http://www.arcadedocs.com/vidmanuals/G/gorf2.pdf

Or page 42 here: http://www.arcadedocs.com/vidmanuals/G/Gorf.pdf

Looking at the schematic it's very fuzzy scan, but here's what I could see and comparing to both docs and for all 3 cab types.

From the power supply 19 pin connector:

1 RED
2 -5 BR-Y
4 RESET O-G
7 +12 Y-R
8 +12 Y-R
9 - SENSE G-R
11 BLU
13 GND B-W
14 GND W-O
15 WHT (to 10 pos driver PC)
17 BLU-R (to coin meter)
18 +5V R-W
19 +5 R-W


From the transformer into the 12 pin connector:

1 - C YEL
2 - C YEL
3 - 9V GRAY
4 - 9V GRAY (Not on the UR or CT)
5 - 9V GRAY
6 - 9V GRAY (Not on the UR or CT)
7 - KEY
8 - Display Lite W-G
9 - Display Lite Y-G (12 on the UR and CT)
10 14.5V BLK
11 14.5V BLK

Hope that helps.
 
Thanks Avidgeek....

I would not of thought this wiring would of been difficult but it has been kicking my butt.

gr
 
Back
Top Bottom