Gorf Joystick "Bumper" needed

jetusenet

Well-known member

Donor 4 years: 2011, 2013-2014, 2024
Joined
Feb 26, 2006
Messages
7,244
Reaction score
745
Location
Staten Island, New York
Hi,
Rebuilding a pretty beat up controller on a Gorf and need the Bally/Midway part# 0873-00910-0000 the "Bumper" that prevents the stick from destroying the mounting bracket. (see pics).

I also needed the dust disk AKA "Follower & Plate Assy." Bally/Midway part# A873-00031-0000 but could not locate one so I fabricated that from a piece of leftover plastic monitor bezel material.

Fabricating a Bumper will be more difficult as I do not know the dimensions of the interior hole as the one I have is beat to heck.

Would anyone know where one would purchase a Bumper or have the dimensions so I could fabricate one? I checked ArcadeFixIt but the only example was a 4-way for a Tron and they were sold out.......

Thanks in advance
Jeff
 

Attachments

  • 20171026_022011.jpg
    20171026_022011.jpg
    659.6 KB · Views: 19
  • 20171026_022051.jpg
    20171026_022051.jpg
    717.1 KB · Views: 19
  • 20171026_022109.jpg
    20171026_022109.jpg
    563.4 KB · Views: 19
I have a stick that could be used for parts. If interested PM me and I'll see what condition the parts you need are in on that stick.
 
This is the component that I am looking for, I am surprised that no one has reproduced this yet........

(Part# 11)
 

Attachments

  • Bumper.JPG
    Bumper.JPG
    60.1 KB · Views: 16
Back
Top Bottom