Gorf - A few issues

TRK

New member
Joined
Jul 4, 2010
Messages
170
Reaction score
0
Location
Bishop, Texas
Hello.

Picked up a new Gorf today from a guy that didnt want to t-shoot and finish it. He said it blew fuses and he never got power anywhere thats all he knows.. (I know, I know)

In either case I replaced fuse holders, it fired up I cant get vertical lock on it but I can get it to a slow roll. Another issue is the picture. Is this a test mode or indicating a bad board. Also the control board in the coin area with the 2 adjustment knobs and test switches do NOTHING. ..

The 3rd an probably most important is the video connector.. see pic the grey wires get very very warm.. as indicated by the brown burns. This was already like this.

I also know the tint has shifted. I got it home and went right into tshoot mode, dispensing with the pleasantries of the look of it for now.

Thanks in advance. I have NOT checked B+ as this is my first g07 and I havent studied up yet and I am sure its mostly a game problem.
 

Attachments

  • gorf 002.jpg
    gorf 002.jpg
    90.7 KB · Views: 29
  • gorf 003.jpg
    gorf 003.jpg
    90.1 KB · Views: 28
Last edited:
Pic 1 appears to be in Test
Pic 2 The header on your power supply is burnt and needs to be replaced. You will also need to replace the connector that the wires are going into. This is a Very common problem on Gorf.
 
Thanks Dokert,
Excuse my nubeness but by PS header you mean the Header pins the connector is on?
Thanks Again.

I figured out it was in test mode and the switch is toast.
 
Back
Top Bottom