golden tee green versus red board

cadillacman

Well-known member
Joined
Nov 25, 2007
Messages
15,504
Reaction score
542
Location
Roscoe, Illinois
hey guys heres a couple dumb questions for ya...

boss had a gt 05 with green board, we upgraded with a green complete board..

boardset had issues, the seller is out of green but i did get my hands on a red board.

prob is, i didnt do my research and even though my bosses ps is newer and looks like an atx supply, it does not have that big rectangular connector.


so my questions are:

will a red board work with a standard comuter atx or do i need one with a 5v adjust?

does the board logic on a red board run off of 3.3 or 5v?

anyone ever cannabilise a old atx for the connector, and wire it to a different supply?

basically its looking like i just need to get him to buy a new supply, but wanted to see if any of you figured out a way around it.
 
Call me lazy, but I would just buy the correct one. Too much time and effort just to save a few bucks.

JJ
 
yeah i know, but hes dropped tons o cash at this thing now so im trying to save him a little cash where i can.

its happy with a standard comouter supply, even says voltage level ok on startup screen s im ok there... im willing to bet this board runs on 3.3 and not 5v.

the only issue now is that i will need to rewire the marquee as for some reason the 100vac goes through the supply? weired. ill prolly need to rewire the coin lights too.
 
Last edited:
so far so good. Running just fine on that pc atx power supply.

I had to rewire the marquee lights just as expected.

one unexpected thing was i lost the left, right, and fly by buttons. there was a ground going to a seperate connector to the ps i thought i didnt need to use, well, i did heh.

no biggie and this damn thing is finally back and up 100%.
 
Back
Top Bottom