Golden Tee Classic Help!!!

tobyocc

Well-known member
Joined
Dec 9, 2008
Messages
1,290
Reaction score
82
Location
Temecula, California
Ok I know nothing about monitors so I will need to noob help. I am a pretty quick learner so here's what happened:

Game was working great and then cut out and no picture but still plays blind.


Any help would be great.

Toby
 

Attachments

  • Back 1.jpg
    Back 1.jpg
    15.9 KB · Views: 16
  • Board 1.jpg
    Board 1.jpg
    23.1 KB · Views: 13
  • Monitor 3.jpg
    Monitor 3.jpg
    37.8 KB · Views: 16
  • Monitor 2.jpg
    Monitor 2.jpg
    41.9 KB · Views: 14
  • Monitor 1.jpg
    Monitor 1.jpg
    55.2 KB · Views: 19
Ok, how many should there be. I found one not sure if there are more? 2amp 250v. Can I get one at Radio Shack. Is there a special size or type to replace it with? What would be my next step? Thanks.
 
Ok, how many should there be. I found one not sure if there are more? 2amp 250v. Can I get one at Radio Shack. Is there a special size or type to replace it with? What would be my next step? Thanks.

Whoa, slow down. Is the fuse bad?
 
Ok , I sent someone to get a fuse just for good measure and put the new one in and same result. The fuse looks fine to me. The fuse is intact wire is not broken and no black residue. Still plays blind.
 
The fuse is intact wire is not broken and no black residue.

Because it looks good doesn't mean it is. You need to use a DMM on continuity test. I've had this happen on several occasions - I'll never assume that if it looks good it is. I would now recheck the new fuse. It's possible that fuse is now bad also. Do you have a DMM?

The more I look at the picture that shows the back side of the flyback it "appears" like there is a nice crack running around the flyback. Do you see the big black thing with the red wire comming out of it that goes to the tube? That's your flyback. Inspect that for cracks and excess crap on the top of it.
 
Last edited:
If your flyback is actually cracked, you will need to have a new one installed.
 
Ok, well after 4 fuses I have now figured out the fuse on the chassis blows when I power on the machine. What does this mean? Please say it is a fairly easy fix. I want to golf. Thanks guys.
 
Ok, So I guess my only option is to order a repair kit from Bob Roberts. I don't really know what other option I have. If anyone has any other ideas let me know. This will be my first fix on a chassis. Wish me luck.
 
Back
Top Bottom