Golden Tee 97 Monitor Help

thetrolltoll

New member
Joined
Jul 30, 2009
Messages
1
Reaction score
0
Location
Maryland
Hey all I am new to this stuff. I own a golden tee 97 and I had to move it from new york to maryland. The trip may have been rough on it. So the colors are way off. There is way too much red and the picture is streaky/blurry. I have adjusted the colors and they are as good as i can get them. I have attached a photo album of what I am talking about (I don't know if the wire pics will be of any help). Please let me know if you have any suggestions as to how to fix this frustrating problem. Thanks. (I don't know the make or model of my monitor, I hope the pictures help with that)

http://www.flickr.com/photos/41003867@N08/sets/72157621886974774/
 
Okay, you have a K7000 series monitor.

The first thing you need to do is look on your chassis and find the pot that controls contrast and the pot that control brightness. start with the contrast pot, but turn both down until the color stops bleeding outside the lines it should be in.

Next, you'll find two pots on the flyback (big black thing on the left side of your chassis, in case you don't know). The top pot is for focus. Adjust it to get a nice sharp pic (unless the blurriness is caused by your camera). Use a mirror or friend if you need to.

Then you should be good to go...
 
Back
Top Bottom