You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
Hi all,
I recently was lucky to snag a Golden Tee 2K Arcade cabinet for free. However, its currently not working and would love to get it working. There is currently no sound or display.
I can confirm the display does turn on (high frequency is present as well as static electricity on the screen.
I verified voltages ~5.1 v and ~12.2 v are present on the connector.
The dip switches are correct. DSw1, closest to connector all 4 are 'on'. DSw2, near the video status LED 1&2 are 'on', 3&4 are 'off'.
I re-seated ALL socketed chips, including the GT97 and GT99 chips. Before putting them back in I cleaned sockets with Isopropyl Alcohol.
I replaced the battery, only had a 2032 on hand, so I used that.
The video status LED blinks every ~2sec.
The sound status LED is not on. If I press on a chip, it does turn on briefly, but there is also a click noise that occurs every time it blinks, which sounds like its coming from the coin or bill mechs.
I also noticed if I touch the case of the power supply, there is a slight feeling of voltage leaking. Bad PSU or ground?
This is my first arcade machine so I don't really have anything on hand to test the monitor or the board separately. I've also done my best to search before posting.
I am not afraid of soldering and do have a digital multi-meter on hand.