Golden Axe Problem

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
The sound on my Golden axe is garbled and super erractic whenever I touch the Volume Knob. My 12v is at 11.4v. Would this low voltage cause the sound to act up like this? Or is it a bad Volume Pot? Anyone?
 
Last edited:
I checked the voltages at the Supply:

AC: 120.2
+5 - 5.02
+12 - 11.04

It looks like -5 isn't used.

Alright, after some tinkering, I got the picture to stay in place, and noticed that when I undo the speakers and rehook them up, the sound is correct, just very low. Only after touching this sound dial, does it go crazy. Anyone know where I can get a new one of these, if this is the problem?
 

Attachments

  • sound.jpg
    sound.jpg
    93.5 KB · Views: 8
Last edited:
Now and again you can get them working 'good enough' by turning the knob rapidly from one end to the other.

It usually works on old stereo receivers ;)
 
Back
Top Bottom