Golden Axe 2 - 3p/4p kick harness/connector?

cr4zymanz0r

Member
Joined
Mar 11, 2011
Messages
79
Reaction score
1
Location
Arkansas
So I just got Golden Axe: Revenge of Death Adder in and I want to add 3 and 4 player to it. I see the pinouts in the manual (http://antelopearcade.com/files/Arc...-_REVENGE_OF_DEATH_ADDER_US_ARCADE_MANUAL.PDF)
However, I don't know what the correct size connectors are. If Mouser or Digikey has them, that would be nice but I just don't know what I'm looking for. I just want to make an adapter to send it to a DB15 port to plug Neo Geo pinout controllers into.

Does anybody know the exact connectors I need?
 
post a picture of the board. most are molex .100 or .156 but ive never seen that board before.
 
Here's a pic of the PCB. Top right 10 and 11pin connectors: http://s376.photobucket.com/user/K1...IITheRevengeOfDeathAdder_zps7c4f1d9e.jpg.html
Not my pic, but I'm not currently at home.

I just want to make 100% sure I'm looking at the right connector before ordering.
Last time I saw advice on a different forum to order this connector (http://www.digikey.com/product-detail/en/EHR-15/455-1013-ND/527237) for making a Sunset Riders/Konami 3/4p kick harness, then when the connector came in the holes were way too small
 
The link I posted above this post should be right. Looks like 50 and 55 cents. Don't forget the 21 pins that go with them.
 
Back
Top Bottom