GO7 scroling

paul400

Well-known member
Joined
Nov 8, 2010
Messages
2,416
Reaction score
219
Location
Hixson, Tennessee
hey guys, have a go7 scrolling issue. this is one of several chassis i have as backups so i know the sync is hooked up correctly.testing this chasis in a centipede by the way. anyway there was a power surge at my house that caused this problem with chassis, i live in florida,bad lightning down here. i started by replacing the pots, i have an ic chip on hand but havent gone any further yet. i just cant get the pic to lock in had it locked for about a minute then it slowly started scrolling again.
 
i bought them off ebay and they claimed to be all recapped.this on was workin fine until the power surge
 
Let's see a picture of the chassis main board you have. A good picture should tell me if it has indeed been fully recapped.
 
Here's the CBO pic.
Thanks!

paul.jpg
 
I had a CBO chassis that wouldn't sync, and it turned out to be one of the transistors was broken by the RGB and Sync plugs. Might be worth checking anyway :)
 
Back
Top Bottom