Go7 monitor adjustments

txplayer05

New member
Joined
Aug 11, 2009
Messages
12
Reaction score
0
Location
New Mexico
I recently installed a cap kit on my monitor and connected to my jamma 60 in 1 board and it looks great except on the left side both top and bottom it seems to curl just a little bit so the game looks good except on the left side some of the left to right straight lines look a little off...i have tried adjusting the rear adjustments that are right at the back of the chasis and got it to look pretty good with the exception of the curls and uneven lines...is there something i missed or need to do to fix it...any help would be appreciated...thanks
 
The G07 has a history of this when used with the 48/60-in-1. If tweaking your horizontal frequency doesn't help, you could try checking your B+, as it's setting will also make this more or less noticeable.

Still, sometimes you just have to say it's "good enough" and live with it....
 
If you have a meter, set it to DC volts, 200 setting. There is a large white resistor mounted on the left wall towards the back. The end farthest from you should read +120vdc.

The B+ Adjustment pot is the pot that is just a bit behind the others, and facing up...

go7-1.jpg
 
Back
Top Bottom