GO7 Jitter

Tronic

Well-known member
Joined
Apr 22, 2008
Messages
2,719
Reaction score
324
Location
Reno County, Kansas
I have a GO7-CBO that I did a deluxe kit on from Bob Roberts. HOT, Fly, Reg, all the caps. It was in a Ms Pac cab of mine and was working great. Probably a good month of working fine.

Now I was fixing up a Ms Pac for someone else and decided to throw it in and now the entire screen jitters, and it's a slight pinkish hue to it.

I made sure that I have good ground connection, what else could I check? Sort of in a pinch to get this working, so my mind isn't as clear as it normally would be.

Any ideas would be appreciated

Luke
 
Check the AC voltage coming into the monitor to make sure that it is not too far off what is expected and that it is steady and not jittering itself. Also, make sure it is coming from the isolation transformer.

Did you move the entire monitor over, or just the chassis? Have you tried pulling up your other cabinet and hooking the monitor back up to the other game to make sure the monitor itself is the issue?
 
Thank you Mod, I had hoped I didn't have to pull it out after getting it mounted in there, but I pulled it anyway.

It was a problem with the monitor, I had to adjust the H Freq or the V lin, I can't remember. Either way it was one of the pots must have gotten bumped when I was installing it.
 
Back
Top Bottom