GO7- image is shifted to the left

pinnut

Active member
Joined
Aug 3, 2010
Messages
1,084
Reaction score
20
Location
New York
the image is shifted to the left, there is about one inch of black on the right side. moving the raster jumpers on the main board from left to right and to center have no effect. pots have no affect either, cant move it right, or even more left. what to do?
thanks

ps- i had another thread with sync issues, thats fixed. bad connection from a neck board wire to the board
 
I don't remember the other thread off hand. Has this monitor been rebuilt? B+ is 120vdc?

Have you tried the H-FREQ pot? Turning it almost 100% the other direction and see what you get doing that?

IF it literally doesn't do anything maybe a new pot would be in order. Not that it would fix your problem, but would likely help in the troubleshooting down the road.
 
Back
Top Bottom