GO7-CBO 19" available?

Pilot53

New member
Joined
Dec 20, 2010
Messages
9
Reaction score
0
Location
California
If you read my previous post, my GO7 board, at the VR is putting out 165 volts DC. I did the full on cap/flyback/fuses/HOT/coil, etc, and still cannot regulate the voltage down.

Anyone have a board to swap or for sale. I am getting so busy at work, I do not have too much time to work on it, and would rather get a working one and swap it.

Thanks.
 
Fixed!!

Stupid me. I put the VR transistor in backwards, and the pins were shorting against the chassis. I looked at everything, and checked the transistor, but found it shorted. Looked at the pins and saw that I put the transistor in upside down, and the pins were shorting. Reversed it, powered up, and bingo, picture!!

Thanks for all the help.

Pilot
 
Stupid me. I put the VR transistor in backwards, and the pins were shorting against the chassis. I looked at everything, and checked the transistor, but found it shorted. Looked at the pins and saw that I put the transistor in upside down, and the pins were shorting. Reversed it, powered up, and bingo, picture!!

Thanks for all the help.

Pilot

And who says that they only go in one way?;)
 
They only go in one way, if you check your work. Something I did not do correctly.
 
Back
Top Bottom