Go look at the back of your Williams machines.

camperjohn

New member
Joined
Oct 18, 2009
Messages
220
Reaction score
3
Location
San Diego, California
I have on the back of my pinball machine, two stickers that have long faded. I can reproduce them in photoshop, but have no idea what they used to say.

Does anyone recognize what stickers used to be on the back of this machine?

1) What used to be here (top of head)
http://www.bodydot.com/photo-l0QfahAQTk0H47Fo-High-Speed-Sticker-Closeups.html

2) The top square is the Product information sticker (which I can reproduce), but what was under this?
http://www.bodydot.com/photo-l0QfahAQTk0H47Fr-High-Speed-Sticker-Closeups.html

3) There are two staples on the back of the head. What was stapled there?
http://www.bodydot.com/photo-l0QfahAQTk0H47Fv-High-Speed-Sticker-Closeups.html

4) Several more staples on the back. ?????
http://www.bodydot.com/photo-l0QfahAQTk0H47Fu-High-Speed-Sticker-Closeups.html

Ideas what used to be there? Anyone? Go look at the back of your Williams machines and see.
 
that is a High Speed pin so it is sys11 so I doubt it would have a WPC sticker on it but prolly something in the same ball park
 
Sorry for the delayed reply, this is the first chance I have gotten to get this shot for you. It's the back of my Williams Sorcerer. It's blurry, but you should be able to make out the text. I don't have any other markings on mine like yours had.
 

Attachments

  • stickers.jpg
    stickers.jpg
    91.8 KB · Views: 39
Wow thanks!! I think I could find the remaining text or at least fake it. I think there is another of these stickers on the inside of the head above the CPU.
 
I found this FCC disclaimer that seems to match the sticker:

"This equipment complies with the requirements in Part 15 of FCC rules for a Class A computing device. Operation of the equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps to correct the interference."

Thanks!
 
Dont know about the staples, just remove them if you want to, I would! I did notice I dont have the lower vent holes in my cab's back like it shows in this pic---

http://www.bodydot.com/photo-l0QfahA...-Closeups.html I have the top vents in the back of the head and my cab's vent holes are two circle cut-out's in the floor of the inside of cabinet in each rear of cab's 2 corners.
 
Back
Top Bottom