Ghouls n ghosts conversion dip switch settings

ctozzi

Active member

Donor 2012
Joined
Jun 23, 2008
Messages
1,682
Reaction score
7
Location
Henderson, Nevada
I'm Just about done with this dedicated cabinet built and i have a Street Fighter conversion PCB that I would like to find out how to adjust the DIP switch settings for free play and attract mode sounds and such. This PCB is different than the original ghouls and ghosts so I don't have any starting point to adjust for free play. Any help is appreciated
Chris
3f922b5303a8abfec4e4473b93b1f3f3.jpg
 
original is 3 banks of 8 dips each, and the conversion is 3 banks of 8 dips each, isn't it? Any reason to believe they wouldn't be the same on the conversion, and/or have you tried yet?

Great looking cab, btw.
 
Tried it no luck
Are you referencing a good source? I find a lot of those web pages with text formatted dip tables are just wrong.

Beyond that, what was the donor board? I've got a conversion on a world warrior, but I've barely played it yet and haven't touched the dips yet. What would you want to set it to? I can try to change the settings on mine and see if it works.
 
Just free play. And I opted not to do laminate and kept the sides the original. I wanted a little vintage wear look.
 
Dam ok thanks

I just remembered that I also couldn't find a dip setting for free play on my sf2 conversion. I rigged a keyboard switch inside the coin mech - you slip your finger under the flapper door and press the button. The button is flat and has a 3M peel and stick adhesive on the back.
 

Attachments

  • IMG_9905.jpg
    IMG_9905.jpg
    549 KB · Views: 15
  • IMG_9906.jpg
    IMG_9906.jpg
    573 KB · Views: 15
Last edited:
Back
Top Bottom