Ghosts & Goblins Control Panel and Other Parts

Bishopx

Permanently Banned for creating a second account t

Donor 2011
Joined
Aug 3, 2011
Messages
398
Reaction score
1
Location
Newhall, California
Rating - 50%
4   4   0
I'm trying to piece a G&G together from parts. Does anyone have any parts available? I currently only have the following:

Overlay
Marquee
PCB (non-working)
 
Sounds like you also need a Dynamo HS-1 cabinet and monitor as well!

You'll also need a custom wiring harness. You can either build your own to the Ghosts & Goblins pinout harness, or you can buy a regular JAMMA harness and build your own conversion board or buy a pre-made Capcom to JAMMA board to plug into a regular JAMMA harness.

What's wrong with the G&G board?

-Muel
 
I don't know what's wrong with it yet. I have no way to test it. I have a brand new 19" monitor. I was thinking about converting a Bionic Commando cabinet into a Ghosts and Goblins esque cabinet if I can't find one.
 
Last edited:
The Bionic Commando CP is pretty close - I've never tried to line up the overlay to see if it's exact.

I was just curious if you knew what the problem was - No Video, No audio, corrupt graphics, etc...
 
I don't know yet. I can make the control panel if I can get someone local to let me take measurements. I water jet, bend and weld control panels all the time. I'm working on a bunch of mame control panels to fit Neo Geo cabinets for Vintage Arcade.
 
If I could get an accurate profile view of the control panel and the width, I can transfer the hold pattern of the Ghosts & Goblins cp to it. I wonder if they are the same width....hmmm.
 
Yeah. At this point, I'm just looking at making a cabinet that has the same feel as the original. I don't currently have one to copy so I'm going to just use an existing cabinet that I have.

Does anyone have a Ghouls & Ghosts control panel for sale?
 
Back
Top Bottom