keithsarcade Well-known member VAPS Joined Nov 27, 2008 Messages 8,875 Reaction score 160 Location St Peters, Missouri Nov 20, 2009 #1 ...Can it be done? I already have it sandwiched between 2 sheets of glass but it still has a ripple effect thats driving me nuts. Any ideas?
...Can it be done? I already have it sandwiched between 2 sheets of glass but it still has a ripple effect thats driving me nuts. Any ideas?
spacies Member Joined May 19, 2008 Messages 593 Reaction score 6 Location Auckland, New Zealand Nov 20, 2009 #2 Yep. Get some contact glue and spray it to the back of the print and the rear piece of glass. Let the contact go off (safe to touch with your finger) then carefully roll your decal across, working it flat as you go. Job done.
Yep. Get some contact glue and spray it to the back of the print and the rear piece of glass. Let the contact go off (safe to touch with your finger) then carefully roll your decal across, working it flat as you go. Job done.
KevinMullins Active member Joined May 27, 2009 Messages 2,187 Reaction score 10 Location Mcloud, Oklahoma Nov 20, 2009 #3 Heat..... not too direct like a heat gun or anything, but more like a warm day in the sun heat.