FS Parts: Get your Nintendo locks and keys here! Takigen K-6510 keys $5

smalltownguy2

Well-known member

Donor 2013
Joined
Dec 30, 2008
Messages
17,076
Reaction score
2,650
Location
Osceola, Wisconsin
Rating - 100%
154   0   0
Get your Nintendo locks and keys here! Takigen K-6510 keys $5

I needed to get my hands on a Takigen K6510 key for my recently acquired red tent, so I contacted a local distributor for them. I was quoted a pretty decent price, so I thought I'd let others get in on the order before I placed it.

$8 each will get you as many keys as you want. This covers the bubble mailer and USPS First Class mail shipping to you. I'll place one large order and ship the keys to you personally.

This roughly half the price I was able to find these keys for anywhere else, so definitely a good deal, for sure.

I'll leave the interest thread open for a week before placing the order.

Shoot me a PM with what you want, your email address for Paypal, and your mailing address.

Thanks!
 
Yes, sorry for the lag - I left the pre-order open a bit longer to give a few more folks a chance to get in.

I'll tally up the totals today and get the order placed. I'll post the payment info in this thread here later.

Thanks!
 
cool, thanks. I'm chomping at the bit to get inside this new red tent I got.... Whoever said patience is a virtue obviously did not have an arcade machine with no key....:)
 
Here's the list as I see it:

Ronzal: 1 key, 2 locks (not sure on locks, $16 plus locks)
Coleco1981: 3 keys ($24)
JamBurglar: 2 keys ($16)
Madrits: 2 keys ($16)

Total: 8 keys, 2 locks (if possible)

I'll get this order going ASAP. PM's going out now...
 
Heads up guys, my broker has placed the order with the factory in Japan - parts have a 2 week lead time. When I get tracking info, I'll pass it along.

Thanks!
 
keys

smalltownguy2 if you ever need a source for these locally i am very capable of code cutting those K6510 keys. not low quality duplicates. just to clarify i am not selling them, but for anyone who has helped me out i would return the favor if they needed this key.
 
Last edited:
Thanks, security, I appreciate the offer.

Just a heads up everyone, my package from Japan has landed at my local post office this AM, so I should have some minty new locks and keys in my hands this afternoon. :dance3:

As soon as I get everything organized, I'll get padded envelopes ready and get these out to those who have pre-paid.

I will have a small selection of parts left over for those who want last minute items.

Thanks!
 
I still need a lock (preferrably two) if you have them. I was unclear on whether you'd be able to get locks. Actually, I just need parts for locks but I'll buy the whole lock if it's easier that way. Anyway, if they're available I'll paypal you immediately. If not that's okay too. Thanks.
 
Everyone's needs for keys have been ordered to fulfill, but locks were more tricky. They are significantly more expensive, so I was cautious about how many I ordered. I asked for more than 4 on this order, but the broker told me that the factory makes these locks in large run orders, and a short-run order like mine may not be filled - he felt pretty confident that they'd have at least 4 in backstock.

So I'm fairly confident that I will be receiving at least 4 locks in today's shipment, maybe more if I'm lucky.

Jam, if you need parts, I might be able to get you a parts donor lock from my red tent at a better price than what a new lock will cost you. Otherwise, I have you down for at least 1 new lock. The other 3 locks have already been spoken for.
 
Can someone post what the lock looks like for these keys? I have some that came off a Red Tent without any keys, but I do not know if they had been replaced at some point.
 
delayed, if you have an original lock then it will have the K6510 stamped into one of the flat smooth sides of the lock.
 
Ahhh.....look at this Japanese minty fresh goodness:

IMG_2600.jpg


IMG_2601.jpg
 
Back
Top Bottom