Gauntlet II - Identify Monitor?

PhilYellott

New member
Joined
Feb 10, 2012
Messages
7
Reaction score
0
Location
Red Oak, Texas
I'm trying to fix this Gauntlet II. The monitor was working when I put it in storage, but that was 5 years ago. It is fuzzy, and horizontal is rolling. The pot called Horiz-Osc adjusts it, but it will not hold. I'm sure it needs a cap kit. The Chassis says Electrohome G07-CB0 1981. The boards are replacements I'm sure. The board has a sticker 1987 and the serial number sticker has WG xxxxxx, so Im betting this is from a Wells-Gardner. There is a wired remote as shown in one of the pictures. The bottom right had a bunch of glue covering what I guess was the identifier, and it looks like DS2-V-0.

Can anyone look at the pictures below and help me figure out what cap kit I will need?

Thank you very much!

Phil Yellott

http://yellott.com/repair/G2-01s.JPG
http://yellott.com/repair/G2-02s.JPG
http://yellott.com/repair/G2-03s.JPG
http://yellott.com/repair/G2-04s.JPG
http://yellott.com/repair/G2-05s.JPG
http://yellott.com/repair/G2-06s.JPG
http://yellott.com/repair/G2-07s.JPG
 
you have a replacement chassis in there i don't know the model of it.

but your frame was originally a G07 CBO frame.
measure the yoke and see what the pairs are.

and you can fix the one you have possibly or get a chassis that was designed for your tube and yoke.

also update your general location in your profile and maybe someone local to you can help.

Peace
Buffett
 
Gauntlet II - Now I killed it

I guess I've killed it somehow. I got about half of the cap kit capacitors locally and thought I would replace those and see if they helped since I could get those today. I know, I should have waited. Anyways, I discharged the monitor, and carefully replaced the ones I had. Now, I get no glow on CRT guns. Ive re-checked all the plugs and the fuse is not blown.....any suggestions on what to try now?

Thanks!
Phil
 
Back
Top Bottom