Gauntlet: Dark Legacy Boot problem

flatus

New member
Joined
Aug 2, 2010
Messages
14
Reaction score
0
Location
Shreveport, Louisiana
I have a Gauntlet Dark Legacy (Atari Vegas board) that is getting an Audio Init Boot failure message. I replaced the hard drive. I have 5.2V and 12V on the boards and am not sure what the problem is. However ... I have about 2.4v of AC leak from my power supply. These power supplies are pretty expensive. I suppose I could replace (perhaps wire an ATX computer power supply??) but before I go through the effort and expense does this sound like a cause? I am measuring with an analog meter (not sure if that makes a difference). Any help is appreciated!
 
So, does the game still function without sound? Can you get the the Audio Hardware Test Screen? Is this a problem that recently popped up or did you get the game like this?
 
I just had a similar issue, I had to get a new power supply from Betson $ 68.00 shipped...Wow $$. It fixed all my issues 100%. Also look for any burn marks on the jamma connector on the pcb, i had a few that i cleaned off with contact cleaner and lubricant to get better flow on my board, as I was getting flickering. I now have no more issues of any kind. Best of luck these games are so fininky.
 
Back
Top Bottom